DodgeRam.info > TSB's > 02-11-98

TSB 02-11-98

Alignment Specifications

Visit Geno's Garage
for Truck accessories.		 Geno's Garage Truck Accessories
Date: Oct. 30, 1998

Models:

1999 (AN) Dakota
1999 (DN) Durango

Discussion:

The alignment specifications identified in the 1999 Dakota Service Manual (Publication No. 81-370-9110), page 2-4 and in the 1999 Durango Service Manual (Publication No. 81-370-9116), page 2-4 have been changed. The following charts identifies the revised alignment specifications. In addition, the charts also identify the alignment specifications for the Dakota RIT. All changes to the Service Manual Alignment Specifications are highlighted with **Asterisks**.

 

Dakota (except R/T)

Vehicle Wheel Base Caster (+/- **1.00**deg.) Camber (+/- 0.50 deg.) Total Toe (+/- 0.1 0 deg.)
2WD 111.9 2.99° **-0.25°** **0.10°**
2WD 123.9 3.09° **-0.25°** **0.10°**
2WD 130.9 3.13° **-0.25°** **0.10°**
Maximum RT to LT Difference 0.50° 0.50° N/A
4WD 111.9 3.16° **+0.38°** **0.10°**
4WD 123.9 3.23° **+0.38°** **0.10°**
4WD 130.9 3.27° **+0.38°** **0.10°**
Maximum RT to LT Difference 0.50° 0.50° N/A

Dakota R/T

Vehicle Wheel Base Caster (+/- **1.00**deg.) Camber (+/- 0.50 deg.) Total Toe (+/- 0.1 0 deg.)
2WD 111.9 3.67° **-0.25°** **0.10°**
2WD 130.9 3.81° +0.38° **0.10°**
Maximum RT to LT Difference 0.50° 0.50° N/A

Durango

Vehicle Caster (+/- **1.00**deg.) Camber (+/- 0.50 deg.) Total Toe (+/- 0.1 0 deg.)
2WD **3.31°** **-0.25°** **0.10°**
4WD 3.31° +0.38° **0.10°**
Maximum RT to LT Difference 0.50° 0.50° N/A

The specifications listed in the 1999 Dakota and Durango Service Manuals should no longer be used. Service Manual revision pages for the new alignment specifications will be available soon. Please make a note in these publications to refer to this Technical Service Bulletin until the revised pages are available.

Notes:

Policy: Information Only

Thanks to Bob Bergevin for providing this TSB information

  Top of Page  

  DodgeRam.info Home  

 

This page was edited on: May 3, 2004